Commercial plumbing for Colorado Springs restaurants, offices and rentals
Restaurants, small offices, shops and rental owners call us for the work that keeps doors open: kitchen lines that slow by Friday, flush valves that stick, water heaters that quit mid-shift, and the yearly backflow paperwork.
- Phones answered 24/7
- Restaurants, offices, rentals
- Yearly backflow tests
Updated October 2026Phones answered 24/7
Want a price on this job?
Call and describe the job. We answer 24/7 and set a visit.
Quick answer
Commercial plumbing in Colorado Springs runs on timing: a kitchen line, a busy restroom or a vacant unit's water heater has to be fixed around the hours you operate. Published figures put plumber rates in the city at $90 to $180 per hour. We handle grease-heavy drains, commercial fixtures, required backflow tests and tenant repairs.
Plumbing that has to work during business hours
Commercial systems fail differently from houses. Kitchen drains carry fats, oils and grease that cool and coat the pipe past the interceptor. Restrooms run flushometer valves instead of tank toilets, with diaphragms that wear out after thousands of cycles. Mechanical rooms hold backflow assemblies, mixing valves and larger water heaters most owners never look at until something stops.
We camera the line before recommending jetting a grease line, rebuild flush valves with the kit for that valve model, and keep a list of every testable assembly so the yearly backflow test does not sneak up on you. Long runs and repeat backups start with a camera inspection, so you are not paying to guess.
When a repair needs the building's water off, we tell you how long and plan it around service, early or after close when that is what it takes.
Cost
Reference numbers for commercial calls
Commercial work is priced job by job, because a two-urinal office and a full kitchen are different visits. These published figures help with budgeting; none is our price.
What moves the price
- Early or after-close timing
- Grease load and time since the last cleaning
- Number of fixtures or units affected
- Commercial-grade valve and fixture parts
- Access through ceilings, chases or occupied units
- Number of testable backflow assemblies
Ranges are published market figures for planning, not a quote. We price your job after we see it.
Restaurants and grease lines
The pattern is familiar: floor sinks backing up during the dish rush, a three-compartment sink draining slowly by the weekend, a sour smell rising from a floor drain. Grease that slips past the interceptor hardens on the pipe walls downstream. Cabling punches a hole through it; jetting scours the wall back to pipe. We also check the interceptor's inlet and outlet tees, floor sink strainers and the trap primers that keep floor drain traps from drying out.
HomeGuide puts hydro jetting at $600 to $1,400 on average nationally.
Offices and retail restrooms
Restroom calls are usually a flushometer that runs on, double flushes or barely flushes, a urinal clogged with scale, a sensor faucet that will not shut off, or a wall-hung toilet working loose on its carrier. Most flush valve faults are a worn diaphragm or piston, a clogged bypass, or a stop valve throttled too far. We rebuild the valve and reset the stop so the fixture flushes fully without wasting water. If the body is cracked or parts are no longer made, we swap in a valve that fits the existing rough-in.
Rental and multifamily properties
Owners and managers need the unit fixed and the tenant kept informed. Typical calls: a running toilet driving up a master-metered bill, a water heater dying between tenants, a unit shutoff that will not close so the whole building goes off for a faucet. We price the fix before starting, coordinate access with the tenant, and note what we found for your records. Turnover visits are a good time to replace seized unit stops and check aging water heaters.
Local conditions
Backflow records every Colorado Springs business carries
Under the Colorado Springs Utilities backflow program, every assembly needs a test at installation and again each year, run by a certified tester. A commercial property often has several: the domestic service, the sprinklers, and maybe a boiler fill or soda line. When a building changes tenants or owners, an assembly can drop off everyone's list until a notice shows up. We record each assembly's location and serial so the annual test covers all of them.
What is included
What we look at on a commercial walk-through
Ask us to look over a building and these are the items we check:
- Each testable backflow assembly and its last test date
- Grease interceptor inlet and outlet tees
- Floor drains and trap primers
- Flushometer diaphragms and stop settings
- Water heater age, relief valve and discharge line
- Mixing valve outlet temperature
- Unit and fixture shutoffs that actually close
- Cleanout locations and access
- Exposed piping near exterior doors and docks
Kitchen line backing up mid-service?
Call any hour and tell us which drains are down; we will tell you what to stop running.
How the job runs
How a commercial service call runs
Triage on the phone
What is down, what can wait, and what to stop using.
Plan the shutoff
Which valve, how long, and when it hurts business least.
Diagnose
Camera, gauge or a look inside the valve before any price.
Price, then repair
You approve the scope; we do the work.
Leave a record
A short note of the fix and anything else we saw.
Brands we service
On commercial jobs we service Zurn and American Standard flush valves and fixtures, Kohler restroom fixtures, Watts mixing valves and backflow assemblies, and A. O. Smith and Bradford White commercial water heaters.
- Rheem
- A. O. Smith
- Bradford White
- Navien
- Rinnai
- Noritz
- Moen
- Delta
- Kohler
- American Standard
- InSinkErator
- Uponor
- Watts
- Zurn
FAQ
Questions from owners and managers
Yes, when the job allows it. Phones are answered 24/7, and for repairs that take water or a restroom out of service we set the time with you, early morning or after close.
Large in-ground interceptors are emptied by a pumping service with a vacuum truck. We handle the lines into and out of the interceptor, the tees and baffles, and small under-sink grease traps.
Usually a dry trap. Floor drains that rarely see water lose their trap seal and let sewer gas through. A trap primer or a routine splash of water fixes it; a cracked trap needs repair.
Yes. We take calls from managers and owners, coordinate access with tenants, and send the details of each repair so you can bill or file it.
Most often the diaphragm or its bypass hole is clogged with debris or scale, so the valve cannot close. A rebuild kit for that valve model fixes it in most cases.
Related services
